Design Your Chip

Saturday, November 24, 2012

Posted by Amit Raj at 12:09 AM

▼ 2012 (3)
- ▼ November (2)
  - Setup and Hold checks
  - RTL - GDS flow
- ► April (1)

RTL - GDS flow

The flow chart for the GDS – RTL flow is shown below : Steps to each run viz. synthesis, PNR, STA : • Convert the pin details...
Industrial Physical Design Flow

VLSI Physical Design Flow is an algorithm with several objectives. Some of them include minimum area, wirelength and power optimization. ...
Setup and Hold checks
NEED OF MEMORY TESTING

Although most of these embedded memories are single-port static (and in relatively few cases, dynamic) RAMs today, the high demand for bandw...
Memory - RAM

The Memory of a computing system holds its state information and dominates the chip area. A memory unit (RAM) may contain millions for memor...
Good e-Books

1. Static Timing Analysis for Nanometer Designs 2. Static Timing Analysis Overview 3. High Speed and Low Power FPGA Implementation of ...
Why This Blog ?

Hi all, this is Amit Raj , from India. This blog is all about Design and Testing of Digital ICs. I don't want to treat this as only ...
ICG Enable Timing Issue

As we know Integrated Clock Gating cells are used to reduce dynamic power dissipation in the design, which is being Enable by CTRL logic. To...

Picture Window theme. Theme images by enot-poloskun. Powered by Blogger.